Spring is an indispensable part, considering the special nature of the shape, it will always be intertwined with each other! In daily life, a relatively large spring can also be decomposed manually. But small springs are unlikely to be disassembled manually. Many small springs can't be seen by naked eyes. If they are disassembled manually, special optical instruments and special tools are needed. This decomposition method may be difficult to complete. As a result, the operation of the staff is very inconvenient, and the work efficiency is also seriously reduced.
At present, the methods to prevent small springs from being entangled are as follows:
1. The two ends of the spring should be closed as far as possible in the production of modulation.
2. The product should be packed in small bags to avoid too much quantity in each package.
3. When the product is packed, air is pumped and heat capacity is sealed to reduce the inner space of the package and avoid winding during transportation.
4. Use lower viscosity packaging materials to cover the packaging layer by layer.
5. Blister box packaging
The other part of small spring can be decomposed by vibrating plate, which has some limitations. Not for all springs.